![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 639 | Total Threads: 50,828 | Total Posts: 518,558 Currently Active Users: 940 (0 active members) Please welcome our newest member, JodyG219 |
![]() |
|
|
Thread Tools | Display Modes |
![]() |
#27 | ||
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,855
|
Quote:
![]() Quote:
You need a 20mm OD and 17mm ID to fit in the master and clear the rubber shield. Some time after making the 20mm tube, I found a piece of old shower curtain rail that would have been just the ticket without modification. I can send you a piece if you can wait a couple of days for the postie? I found that the square cut tube pushed the assembly easily into place, and a single plonk with a hammer seated it perfectly.. No need to welt in home. I also found that the best way to hold the master to work on it was to clamp it on an old handlebar and nip the handlebar in a vice. Let me know if you want a bit of tube...PM me your address again please.
__________________
|
||
![]() |
![]() |
|
|