Slow Monster rebuild

350TSS · 15-11-2017, 07:45 PM

In the above photo is today's effort at a male mold for the instrument nacelle which will attach to the underside of the two bolt lugs on the leading edge of the top yoke originally also holding the instruments. The skirt around the edge I hope will marry up with a supporting "shelf" inside the fly screen (hopefully with enough space to put a voltmeter and possibly an oil pressure gauge if I can find an electric one that will work from the current pressure switch position on the clutch casing.

15-11-2017, 07:45 PM	#11
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,422	In the above photo is today's effort at a male mold for the instrument nacelle which will attach to the underside of the two bolt lugs on the leading edge of the top yoke originally also holding the instruments. The skirt around the edge I hope will marry up with a supporting "shelf" inside the fly screen (hopefully with enough space to put a voltmeter and possibly an oil pressure gauge if I can find an electric one that will work from the current pressure switch position on the clutch casing.