Back with a M900 series I

Albie · 04-09-2015, 10:05 PM

Gear lever assembly arrived today at Argos depot. Opened said box and very pleased with secondhand purchase.
Got it home and good look over it and the bearings were/are good but I have brand new ones going back on. The lever was slightly bent but would have been usable as was but straight in the vice with soft jaws and a gentle tweak and straight again with no scars.
I used the slightly later adjuster rod because not only was it straight it also had the handy spanner flats and a nicer condition all over.
Now all back on the hanger ready to be fitted soon.
£27 all in wasn't so bad really.

Now what's the next bit that not correct then except for the tank and cans.

04-09-2015, 10:05 PM	#11
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Gear lever assembly arrived today at Argos depot. Opened said box and very pleased with secondhand purchase. Got it home and good look over it and the bearings were/are good but I have brand new ones going back on. The lever was slightly bent but would have been usable as was but straight in the vice with soft jaws and a gentle tweak and straight again with no scars. I used the slightly later adjuster rod because not only was it straight it also had the handy spanner flats and a nicer condition all over. Now all back on the hanger ready to be fitted soon. £27 all in wasn't so bad really. Now what's the next bit that not correct then except for the tank and cans. __________________ http://albies93m900.blogspot.co.uk/