Hydraulic Clutch Fluid Issue

Ron1000 · 28-03-2022, 01:26 PM

I’ve just this now put it on stands and covered it over I’ll leave it alone until i hear from Oberon. If they reckon the slave was manufactured correctly then I’ll look at other options.

Pressure plate bearing seems reasonable as i reckon it happened within 1 to 2 miles from home and that would have been when i was sitting in traffic with the clutch pulled in for a good 2/3 minutes before i turned off the engine. Nothing I haven’t done a million times before tho.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

28-03-2022, 01:26 PM	#33
Ron1000 Registered User Join Date: Jun 2015 Location: Livingston Bike: M1100evo Posts: 866	I’ve just this now put it on stands and covered it over I’ll leave it alone until i hear from Oberon. If they reckon the slave was manufactured correctly then I’ll look at other options. Pressure plate bearing seems reasonable as i reckon it happened within 1 to 2 miles from home and that would have been when i was sitting in traffic with the clutch pulled in for a good 2/3 minutes before i turned off the engine. Nothing I haven’t done a million times before tho.