Evo paddock stand pin

Rrawlings · 02-09-2019, 05:37 PM

Can someone please tell me if these are the correct measurements before I get my dad to modify the pin I have cheers Ryan

Luddite · 02-09-2019, 06:18 PM

I've just measured my DP stand and the pin is 95mm long. The first 25mm is 26mm diameter and the remaining 70mm is just under 22mm.

The actual step down inside the axle is 40mm in from the sprocket end, so the measurements shown on your diagram should work just fine.

Rrawlings · 02-09-2019, 06:44 PM

Cheers Vince

02-09-2019, 05:37 PM	#1
Rrawlings Member Join Date: May 2019 Location: Bradford Bike: M1100evo Posts: 175	Evo paddock stand pin Can someone please tell me if these are the correct measurements before I get my dad to modify the pin I have cheers Ryan

02-09-2019, 06:18 PM	#2
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	I've just measured my DP stand and the pin is 95mm long. The first 25mm is 26mm diameter and the remaining 70mm is just under 22mm. The actual step down inside the axle is 40mm in from the sprocket end, so the measurements shown on your diagram should work just fine.

02-09-2019, 06:44 PM	#3
Rrawlings Member Join Date: May 2019 Location: Bradford Bike: M1100evo Posts: 175	Cheers Vince