Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 676 | Total Threads: 50,947 | Total Posts: 519,479 Currently Active Users: 2,115 (0 active members) Please welcome our newest member, Humph |
|
|
Thread Tools | Rate Thread | Display Modes |
12-09-2016, 05:20 PM | #1 |
Guest
Posts: n/a
|
Hello from Glasgow :)
Hi all ,
Picked up my new 1200 R on Friday, after 7 years of Streetfighter 1098S life . Love the bike, it's so much more stable than the SF , feels like it's got more beef to the front end than the SF had , the steering always felt too light. I often found myself 10 bobbing bends more often than not ! . Probably should have had the thing set up by a pro , but too busy with fish suppers , and more important things Anyway, went up to Ullapool on Saturday and stayed the night , then headed home next day , while my 4 friends went right on up to Thurso, Durness etc . The left hand mirror came loose on the way home , and was swinging about like a fairground ride, that really bored me . I'll post some pics here , with a word of warning to any current , or future owners ...........get a radiator guard fitted before you do anything ! Got home and found I had a pinhole in it , and was spraying coolant all over the front left disc It was only about a 2mm gash on one of the tubes , so I've repaired it with some high temp putty , and will find out the price of a new one tomorrow. I'll have a bash at some pics (been a while ) cheers , Stewart . |
12-09-2016, 05:21 PM | #2 |
Guest
Posts: n/a
|
|
12-09-2016, 05:23 PM | #3 |
Guest
Posts: n/a
|
|
12-09-2016, 05:24 PM | #4 |
Guest
Posts: n/a
|
|
12-09-2016, 05:25 PM | #5 |
Guest
Posts: n/a
|
|
12-09-2016, 05:27 PM | #6 |
Guest
Posts: n/a
|
|
12-09-2016, 05:28 PM | #7 |
Guest
Posts: n/a
|
|
12-09-2016, 05:28 PM | #8 |
Guest
Posts: n/a
|
Hi and welcome
I picked up a 1200R on the 1st Sept, having owned an 821 the first thing I did was fit a rad guard as well as engine and oil cooler guards, its all so exposed it makes sense, I went Evotech. The best way I can describe the bike handling is....tight. Its just there all the time feeding back to you. I haven't even touched the suspension settings yet, mind you that seat is a bit hard |
12-09-2016, 05:34 PM | #9 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,984
|
Hello and welcome...
Nice pictures... Is "ten bobbing" a trans-decimal version of thru'penny bitting??...
__________________
|
12-09-2016, 05:34 PM | #10 |
Guest
Posts: n/a
|
Thanks Mark,
I meant to get the dealer to fit one but forgot ! As for the seat , it's like a bag of Portland cement I'll probably get the DP one , as I had one on the SF for a few years and it was much better . Is the Evotech held on with nylon ties ? Cheers, Stewart. |
12-09-2016, 05:35 PM | #11 |
Guest
Posts: n/a
|
|
12-09-2016, 05:52 PM | #12 | |
Guest
Posts: n/a
|
Quote:
No its all engineered to use existing bolts, just be careful when replacing bolts into the aluminium rad though, so easy to cross thread. DP one? |
|
12-09-2016, 05:54 PM | #13 |
Guest
Posts: n/a
|
Oh and brilliant pics, I really need to get out and take pictures with backgrounds, rode past Stonehenge last week bit its hard smuggling the bike in
|
12-09-2016, 06:09 PM | #14 |
.
Join Date: May 2007
Location: Stockbridge
Bike: M900
Posts: 1,984
|
Welcome aboard Maddot: nice photo's.
I don't remember pre-decimal 10 bob pieces, but 50 shiney new pence have definitely got more corners than a note, albeit fewer than a thrupenny bit (Unless you mean the silver Joeys?).
__________________
Original and Best since 1993 |
12-09-2016, 06:14 PM | #15 |
Guest
Posts: n/a
|
Sadly I do, pre decimilisation 10 bob was a note not a coin, 10 bob note, it was reddish in colour, of course it was replaced with the 50 pence piece, but yes thruppenny bits and silver sixpence, there was a chewing gum machine outside the Post office which took thruppenny bits, funny what you remember from your childhood.
|
|
|