Hello from Glasgow - First Ducati, a low miles 2011, Monster 1100.

14-01-2020, 08:40 PM

Hello everyone- new to the forum and to this amazing bike and whilst I won't be able to give out much useful information on them for a while, I hope I can get some from the experts!
Not been out on it much since I bought it given time of year - 30 miles covered only, well it is January in Scotland! - and can't wait for Spring as so far, I am blown away by it, having never had a twin. ( Been on a GSXR 750 K5 for last 2 years)

One thing that does freak me out slightly so far is the sidestand - the lean is very very scary! Is there any way other than buying a £120 replacement forged out of aluminium billet from the USA from The Bay to have it stand a bit more upright? And feel a bit less likely to topple over expensively!

All replies very welcome!

Thanks!

Ron1000 · 14-01-2020, 08:43 PM

Hello mr George. Mine leans over far too, never fell yet so I’d ignore

14-01-2020, 08:45 PM

Good to know, cheers Ron!

Grumpy · 14-01-2020, 10:11 PM

Welcome aboard!
I wouldn't concern yourself about the side stand...' They all do that' !

If you fancy a nimble south, we hold an annual bash called the 'Weekender' in May.
It's a weekend of bikes, food and run outs, oh, the odd sherbet!

http://www.ukmonster.co.uk/monster/s...ad.php?t=57860

14-01-2020, 10:26 PM

Thanks Grumpy, might be worrying to much! And given I'm partial to the odd sherbert, will check that weekend out! Appreciate it.

350TSS · 14-01-2020, 10:20 PM

Or simply cut a piece of 10mm aluminium plate to match the footprint of the bit of the stand that sits on the ground the drill a 6mm hole through it and countersink it, then drill a 5mm hole in the bottom of the stand and tap it 6mm and with a 6mm csk allen screw bolt the two together, alleviating the angle of dangle

14-01-2020, 10:28 PM

Quote:

Originally Posted by 350TSS

Or simply cut a piece of 10mm aluminium plate to match the footprint of the bit of the stand that sits on the ground the drill a 6mm hole through it and countersink it, then drill a 5mm hole in the bottom of the stand and tap it 6mm and with a 6mm csk allen screw bolt the two together, alleviating the angle of dangle

Nice and simple idea 350SS, cheers! Even with my spannering skills I could manage that I think!

Uncle Bob · 15-01-2020, 09:07 AM

Hello and welcome.

mickj · 15-01-2020, 10:09 AM

Welcome to the forum George

, my MZ 1000 suffers from the same lean angle so I just araldited a half inch piece of hardwood to the bottom of the stand shaved to fit in with the base plate and painted it black. Been on there for 6 years now.

20-01-2020, 05:35 PM

Welcome Mr George. I'm 6 months in with my first Monster, which so far has been mix of joy and challenge. Seems to be the norm round here. Let's say, they're beautiful when they're working.

14-01-2020, 08:40 PM	#1
Mr George Guest Posts: n/a	Hello from Glasgow - First Ducati, a low miles 2011, Monster 1100. Hello everyone- new to the forum and to this amazing bike and whilst I won't be able to give out much useful information on them for a while, I hope I can get some from the experts! Not been out on it much since I bought it given time of year - 30 miles covered only, well it is January in Scotland! - and can't wait for Spring as so far, I am blown away by it, having never had a twin. ( Been on a GSXR 750 K5 for last 2 years) One thing that does freak me out slightly so far is the sidestand - the lean is very very scary! Is there any way other than buying a £120 replacement forged out of aluminium billet from the USA from The Bay to have it stand a bit more upright? And feel a bit less likely to topple over expensively! All replies very welcome! Thanks!

14-01-2020, 10:11 PM	#4
Grumpy record breaker!! Join Date: Apr 2006 Location: Peterborough Bike: M1200R Posts: 2,155	Welcome aboard! I wouldn't concern yourself about the side stand...' They all do that' ! If you fancy a nimble south, we hold an annual bash called the 'Weekender' in May. It's a weekend of bikes, food and run outs, oh, the odd sherbet! http://www.ukmonster.co.uk/monster/s...ad.php?t=57860 __________________ It's not the destination, but the journey that matters Definition of a motorbike, a devise for overtaking cars!

15-01-2020, 10:09 AM	#9
mickj Registered User Join Date: Jun 2018 Location: Clevedon Bike: M1200s Posts: 565	Welcome to the forum George , my MZ 1000 suffers from the same lean angle so I just araldited a half inch piece of hardwood to the bottom of the stand shaved to fit in with the base plate and painted it black. Been on there for 6 years now. __________________ Keep the rubber side down. Mick

14-01-2020, 08:43 PM	#2
Ron1000 Registered User Join Date: Jun 2015 Location: Livingston Bike: M1100evo Posts: 867	Hello mr George. Mine leans over far too, never fell yet so I’d ignore

14-01-2020, 08:45 PM	#3
Mr George Guest Posts: n/a	Good to know, cheers Ron!

14-01-2020, 10:26 PM	#5
Mr George Guest Posts: n/a	Thanks Grumpy, might be worrying to much! And given I'm partial to the odd sherbert, will check that weekend out! Appreciate it.

14-01-2020, 10:20 PM	#6
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,422	Or simply cut a piece of 10mm aluminium plate to match the footprint of the bit of the stand that sits on the ground the drill a 6mm hole through it and countersink it, then drill a 5mm hole in the bottom of the stand and tap it 6mm and with a 6mm csk allen screw bolt the two together, alleviating the angle of dangle

15-01-2020, 09:07 AM	#8
Uncle Bob Registered User Join Date: Jan 2017 Location: Milton Keynes Bike: M1100evo Posts: 233	Hello and welcome.

20-01-2020, 05:35 PM	#10
Skeldy Guest Posts: n/a	Welcome Mr George. I'm 6 months in with my first Monster, which so far has been mix of joy and challenge. Seems to be the norm round here. Let's say, they're beautiful when they're working.