Throttle cables for Keihin carbs

RichardDDuke · 19-07-2024, 04:54 PM

Found out earlier this week that the previous Keihin cables I used on my FCR 39s on the 900ss are not only a bit short for the Monster bar set up I now have, but also now have a few kinks in from when they were in storage. As a result they no longer operate smoothly (unquote) and throttle sticks open.

I've tried ordering some original Keihin ones, but have been told that they're on back order and won't be available for at least 2 weeks.

So, does anyone know of any alterntaive throttle and cable alternatives that would be long enough and fit the Keihin 39s ?

P.S. The carbs aren't split (as per Desmo Duke's set up) so are still linked side by side.

Nickj · 19-07-2024, 04:57 PM

Venhill and cable tec will make you one to almost any length you might like.

Dukedesmo · 20-07-2024, 10:04 AM

I wanted to alter the cables on my Monster (split Keihins) as I wanted a 916 throttle tube for it's fast idle position also, because the throttle supplied with it was ridiculously short (and heavy) action.

I couldn't find anything off the shelf so took it to a local cable maker who combined the original 2 into 1 splitter with a new single cable (did away with the closer cables) to fit to the 916 throttle.

In hindsight I'm sure I could have done it myself but it was a quick turnaround and not expensive so all good.

19-07-2024, 04:54 PM	#1
RichardDDuke Registered User Join Date: Oct 2022 Location: Bedford Bike: Other Ducati Posts: 143	Throttle cables for Keihin carbs Found out earlier this week that the previous Keihin cables I used on my FCR 39s on the 900ss are not only a bit short for the Monster bar set up I now have, but also now have a few kinks in from when they were in storage. As a result they no longer operate smoothly (unquote) and throttle sticks open. I've tried ordering some original Keihin ones, but have been told that they're on back order and won't be available for at least 2 weeks. So, does anyone know of any alterntaive throttle and cable alternatives that would be long enough and fit the Keihin 39s ? P.S. The carbs aren't split (as per Desmo Duke's set up) so are still linked side by side.

19-07-2024, 04:57 PM	#2
Nickj Too much time on my hands member Join Date: Jun 2007 Location: Forest Of Dean Bike: S2r Posts: 3,208	Venhill and cable tec will make you one to almost any length you might like. __________________ "The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature

20-07-2024, 10:04 AM	#3
Dukedesmo Registered User Join Date: Sep 2010 Location: Leics Bike: M900 Posts: 2,901	I wanted to alter the cables on my Monster (split Keihins) as I wanted a 916 throttle tube for it's fast idle position also, because the throttle supplied with it was ridiculously short (and heavy) action. I couldn't find anything off the shelf so took it to a local cable maker who combined the original 2 into 1 splitter with a new single cable (did away with the closer cables) to fit to the 916 throttle. In hindsight I'm sure I could have done it myself but it was a quick turnaround and not expensive so all good. __________________ M900, 916, LeMans II.