M750 project

Purchased an M750 here a few months ago started receiving parts back from the coaters after a few mods were done.
Waiting for the casings and heads to get the engine built back up and mounted in the frame then reassemble giving me the much needed room in the workshop. Few pics of before and newly painted bits.

Had to machine up a few spacers to fit the original wheel to the different forks, different sized bearings and such. Also added a few saddles to the inside of the frame to get rid of the unsightly cable tie syndrome.
I cleaned the carbs using a ultrasonic cleaner and fitted a stage 2 dynojet kit as I have cut the airbox and making a new exhaust 1 1/2 headers with two reverse cone megaphone "noiselencers" with a wee muffler on the end.

As the most mechanically inept member of the ukmoc, I will ask just one question. Are you keeping the tank silver?

Originally Posted by Mand

As the most mechanically inept member of the ukmoc, I will ask just one question. Are you keeping the tank silver?

No! I was thinking down the lines of nipple pink! wait and see.

Originally Posted by Sam69

No! I was thinking down the lines of nipple pink! wait and see.

best wait and see then! Mind you there was a fella a few years ago who had a candy pink monster....

[gary tompkins]

Originally Posted by Mand

best wait and see then! Mind you there was a fella a few years ago who had a candy pink monster....

Originally Posted by gary tompkins

Gimp mask and gay bar! bit suspect to me are you the one with the candy?

Not in Scotland tho!

Lovin the wheels baking in front of the aga!

[Nickj]

It was a worryingly rapid find that

Heads and outer casings dipped and stripped blasted with coconut shell acid etch primed and painted with Tetrosyl ht paint ready for assembly.

Hopefully I will get this done on Saturday evening seeing as mrs indoors is having a crows evening then bolt it back into the chassis, it's been a slow progress lately.

[J.P]

looks very smartly done. I think it'll look good when it's eventually finished

It looks fab..
Mine needs powder coating next year its giving me a headache , colours and finishes .
Usually I know what I want but I can't focus on this one...

The its back to the 600 for a few tweaks eventually he will get done but not for the next 3 years!!! I will wait til his engine paint starts to flake!

The 400 has little paint left on its engine.

Oh a tip for Mr Gimp

Needed a break this afternoon so torqed up my heads and put on the belts fitted a new crank seal as well. This will give me a head start for Saturday nights assembly,must be getting old don't want to go to the bar but rather play in the workshop.

Or maybe you could have a little snifter whilst playing in your workshop?

Originally Posted by Mand

Or maybe you could have a little snifter whilst playing in your workshop?

That will be in order, I will be delivering a brewing tank that I have just made for a local micro brewery on Saturday morning may bring back a wee keg to keep me company.