Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 676 | Total Threads: 50,947 | Total Posts: 519,479 Currently Active Users: 2,115 (0 active members) Please welcome our newest member, Humph |
|
|
Thread Tools | Display Modes |
|
02-04-2024, 11:53 PM | #1 |
Lincolnshire Area Rep
Join Date: Oct 2002
Location: Grimsby
Bike: M900ie
Posts: 471
|
Fueling issues
Has anybody had issues with fuel pressure dropping of on a M620 ie with a plastic tank? Internal tank pump and pressure regulator, I am having issues with water in the fuel, not sure how it’s getting in but on a sample of 1 litre I had 350ml of water when it settled. Apparently water don’t burn very well.
Any ideas Folks? Pooh
__________________
Slighty less brain cells than I was born with Last edited by pooh; 03-04-2024 at 12:20 AM.. Reason: Furling issues |
03-04-2024, 07:41 AM | #2 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,737
|
i’d start by checking the breather pipes are clear, if the filler neck one gets blocked water will get in round the cap. plastic thanks have a pair of screw in aluminium nipples for the breathers underneath, these are prone to getting blocked, i ran a small (1/8” ?) drill bit down the ones on the last plastic thank i had.
|
11-04-2024, 12:54 PM | #3 |
Lincolnshire Area Rep
Join Date: Oct 2002
Location: Grimsby
Bike: M900ie
Posts: 471
|
Thanks Slob spot on mate blocked solid.
Pooh
__________________
Slighty less brain cells than I was born with |
|
|