Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 666 | Total Threads: 50,911 | Total Posts: 519,180 Currently Active Users: 674 (0 active members) Please welcome our newest member, iamwatty68 |
|
|
Thread Tools | Display Modes |
|
09-10-2009, 10:22 PM | #1 |
Guest
Posts: n/a
|
Tail Chop
I have been playing in the shed tonight and after working on the rear brakes, stripped and cleaned caliper, had the wrong pads. Fixed the sticky throttle, fitted the carbon heel guards, changed oil and filter, then started to fit the new carbon small indicators at the front, then i started taking off the tea tray and thats it, anyone know where i can get a tail kit in the morning and i will cut me ass off. Or can i just make a bracket from the two tailight studs, i know it will have to include the indicators and the number plate light but it does seem straight forward or am i missing something, oh and the seat release. ANyone ran the cable towards the front of the bike and reversed the lever action on the key??
|
09-10-2009, 11:40 PM | #2 |
Guest
Posts: n/a
|
I run two brackets bent outwards from the tail light studs for the 'plate and the seat release has been bent a further 90 degrees where the latch sits and run on the inside , you should have enough cable for that. just be careful as it may sits badly in the key lever end and get sticky. tried to reverse it but looked like a lot of hassle
|
Thread Tools | |
Display Modes | |
|
|