Quote:
Originally Posted by Macflurry
Clutch plates are Newfren and the stack sat at 39mm including the two steel plates, dished plate, 7 friction plates.
|
Nothing wrong with Newfren plates, I'm using them on both my Ducatis but on both the M900 and 916, I find neutral is a pig to select at standstill if the pack is anything over 38mm.
I don't use the dished plates as I see no advantage in having a plate that doesn't contact flat and they are more likely to slip.
If you need to fine tune the thickness then you can get flat 1.5mm plates (rather than 2mm) but if it's just a tad thick it will get better with wear.
The trick I use is that, with engine off and clutch pulled fully in, the clutch should 'freewheel' a little after you spin it with your hand - if not and it stops dead then it is dragging and neutral will be a bitch to select.