Hello guys, i just did my first belt and tensioner change( Monster 696) and after i mounted all the parts and tensioned the belts (5 and 6 mm allen key method) , I started the engine. The engine started normaly, the sound was normal but I noticed that the belts are crossing the edge of the cam pulley. I stopped the engine , pushed the belt in place and started again. After start, the belt was in the same position as before... its not aligned with the pulley. I noticed that the cam pulley(both vertical and horizontal) have some freeplay back and forth. Is this normal, could this be the issue? I attached some photos with the issue. Im looking forward to receive some advices. Thank you very much and sorry for my english
https://ibb.co/KxTTs0R
https://ibb.co/my6Y0TJ
https://ibb.co/7yDm9XK
https://ibb.co/n65MJcS