[jerry]

the bike Kat crashed is now a ready to start rolling chassis ,, still waiting the painted bits ,,

1........
most of the lights work ok indicators ,tail, numberplate , brake lights , side light in headlamp, neutral light ,fuel sensor , instruments lights , and the horn work OK..

BUT NOT THE MAIN or DIP BEAM ,????

all fuses and connections tested ok and also the switchgear , buzzed out ok ?????

2.......
Then there is the ignition circuit all buzz out ok and relay and switches test ok but no power to the coils and igniters or starter motor ???? but power at the handlebar switch and oil light and pressure switch and other binnacle lights ???

Relays are testing OK the Datatool alarm circuits are ok and working ,,,

The side stand switch has never been connected and is removed from bike for last 17 years ,


The bike and all components was working when dismantled for the repair and rebuild refresh so im at a bit off a loss,, going through every circuit and testing each component on one of my other bikes .. methodical like