Glad I could help BUT note... in the 1100 Evo manual, there are a number of discrepancies between the torque settings in the text and those in the table. With that in mind, I thought I'd better check the figures for the 796 and, lo and behold, there are similar errors there too.
In the instructions I posted earlier, it says the top yoke bolts should be 22Nm and the bottom yoke bolts 24Nm. But, looking at the table, the figures are the other way round:
I believe the values in the table are the correct ones, i.e. 24Nm for the top yoke and 22Nm for the bottom yoke (I think the numbers 24 & 25 in the diagram are the wrong way round).