I have to say firstly a big thanks to Darkness for generously giving me an option to swap cambelt covers for an original condition set and secondly giving me also a freshly plated cable/guide stay missing from mine. Still even when fitted whether that's correct placement direction or what is guides where.
I repainted my left footrest hanger a bit and whilst lacquering also did the carbon side covers.
21369499_10214374291816276_8572141600332913990_n by
Andy Patterson, on Flickr
Still unsure if this position is correct for fitment
21192820_10214376633274811_4965323942693068506_n by
Andy Patterson, on Flickr
21230887_10214376633234810_943683083306736418_n by
Andy Patterson, on Flickr
I also got fitted an improved switchgear control after fitting a new Delphi 10 way connector.
21230866_10214374291176260_6601024902116386408_n by
Andy Patterson, on Flickr
21271359_10214374291056257_5677888750390915783_n by
Andy Patterson, on Flickr
Suicide stand is fitted now but possibly needs painting black if I could undo the nut. I don't want to shear it or ruin hexagon so silver is fine. Connected now to switch.
21231732_10214376633994829_7355339179558278354_n by
Andy Patterson, on Flickr
Stein Dinse parts due this Tuesday last time from them hopefully but very good service by them.
Slave cylinder due this week correct one for year.
Ordered new copper washers for whole bike plus spares so lines can been tightened up and filled with fluids and bled.
Ordered the aluminium crush washers for the inlet manifolds
Oh I ended up with new Ducati oil cooler rubber dampers even though I had some new other non standard ones slightly smaller diameter.