|
I would imagine so but I’m not entirely sure. Standard thread on S2/4/R/RS is an M8/10mm thread which is what these mirrors are. The right hand/brake side mirror is reverse threaded.
Dimensions are:
height from bottom of mirror arm to top of mirror plate approx 140mm
mirror arm length approx 160mm
mirror plate 115mm x 50mm at its widest, tapering down to 30mm at its narrowest
mirror plate thickness 11mm
I’m measuring with a measuring tape so these dimensions are give or take a mm.
hope this helps
Last edited by JayJosephS4RS; 20-04-2018 at 09:09 PM..
|