|
Good luck with the sale Nasher.
These alloy arms don't come up for sale very often. We now know from a recent thread that all the swinging arms on hoop models are interchangeable. So that means that this arm will also fit the M750 and M600. It won't fit the ie models except for the early (2000) M900ie which didn't change to rod suspension link and 25mm axle until 2001.
It's normal for the adjuster plate on the sprocket side to be "shaved" off. This is to clear the sprocket nuts. You can use a shaved one on the right side but not a RH one on the sprocket side.
Also to avoid disappointment; don't attempt to wind out the adjuster bolts from the axle blocks without first removing the tiny screw and washer from the inside end of the bolt. this is there to prevent the bolts from being lost down the road along with the adjuster plates, should they work loose... However it will get mighty noisy before that if it's the sprocket side that comes loose!!
Looks like the marks either side were caused by a clumsily mounted high rise exhaust... They should polish out.
__________________
|