UK Monster Owners Club Forum - View Single Post

slob · 14-08-2019, 08:07 PM

the spindle *should* look like this

which allows you to line up the slots

and access the compression adjuster screws through the holes

If your bike came with non-adjustable forks and has had them upgraded, but not the spindle, you might need to modify or replace your spindle.
Easy enough to check your forks next time you have the front wheel out though.

While the Showas are adjustable, they're not a great design. The stock needles have too short a taper meaning the valves are fully open from a few clicks out and further adjustment makes little or no difference.

14-08-2019, 08:07 PM	#12
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,712	the spindle should look like this which allows you to line up the slots and access the compression adjuster screws through the holes If your bike came with non-adjustable forks and has had them upgraded, but not the spindle, you might need to modify or replace your spindle. Easy enough to check your forks next time you have the front wheel out though. While the Showas are adjustable, they're not a great design. The stock needles have too short a taper meaning the valves are fully open from a few clicks out and further adjustment makes little or no difference. Last edited by slob; 14-08-2019 at 08:14 PM..