|
Set the height to 222 including the fork tops (new ones are 2mm thicker than old.
Ok had a sneaky ride today in to Gloucester CC (20 miles each way) to get the much awaited hair cut. forks relay nice. Pre-load has 12 revolutions no clicks just thread, in one leg Compression is a 3mm Alan screw that has 4 full turns, again no clicks and in the other rebound 4 full turns. I am disappointed for £700 the adjusters have no clicks.
I have set all adjustments in the middle.
bike off the ground 131mm
bike standing no rider 118 mm
thats 13mm static sag
me sitting on with gear on 88mm
thats 43mm loaded sag
the zip tie i have put on is 45 mm from bottom of travel and I feel they are a tad hard. so backed off the pre load 3 full turns
I shall see monday.
Billy
|