|
Got the bike back tonight.
The mechanic had the bike on a Dyno run, just a short run to check fueling and as he suspected it was running massively lean, he reckons the power comander that was on the original spec was probably faulty and has been removed and the ECU isnt mapped for the engine mods.
The guy running the Dyno tried but couldn't get in to remap anything.
The ECU fitted to the bike has the following numbers:
IAW 59M.A2
IAW 59M.A2/HW010/0115_099
12V=052 02
61600.630
996R
DUCATI 007
Have had a look through the links on previous posts and reckon this is the standard S4 ECU, but it does say uprated ECU in the spec I got with the bike.
As I said previously, electronics are not something I am good with.
Can this ECU be modified/flashed/mapped, to suit or do I need a different ECU that can be modified/flashed/mapped.
The other thing the mechanic thought could be causing a problem was fuel pressure but he checked this and was ok, so at least that was something ruled out.
Thanks
Davey
|