Update...
All sorted - it turns out I had fitted two jets (the ones under the little clips) upside down..Doh. Odd that they actually fit the wrong way round. My error.
And I checked the float heights while I was in there and gave them a little tweak to 14mm. Also checked needle pos and mixture screw settings against the recommendation on dynojet sheet - all put to their settings.
Then, looking good - it wouldn't start!! Grrr. Just weak popping ad farting. Checked spark with another plug to head, all good. Then tried the plugs from the motor to the head - dead as a dodo.
Two fresh plugs and fired right up. Now running the best it has ever done since I got it, a few tweaks to mixture / balance settings to clear up low pickup hesitation and all should be good.
thx for the tips
J
|