I also fitted the suicide stand after painting it black as silver finish was the later versions. Very luckily I managed to undo that bolt. Bit of copperslip on it now.
21371254_10214403347222643_7324592019756306671_n by
Andy Patterson, on Flickr
Fitted the second of my homemade copy cable guides to the underneath of engine case for the wiring to the sidestand switch. Not many bikes have it but its on the diagram.
21369339_10214403347102640_714572809446530124_n by
Andy Patterson, on Flickr
Fitted tea tray back with these new longer bolts just to see if I could live with them. Fitted a 6mm washer to give the diameter but they don't float my boat and I still keep searching the net for something similar but they all come too short at 20mm long or the small head and I need 30mm.
21462252_10214403347142641_3930420001443027951_n by
Andy Patterson, on Flickr
Tank hinge is now fitted new nylon bushes ready for tank to come home..
21317487_10214403347182642_3901705226725342868_n by
Andy Patterson, on Flickr
Here is another ask.
Has anyone got a long breather hose from airbox to oil catch container they don't need. someone who may be running different carbs etc. Mine is in one piece and usable but has a black bandage around one end where it was split.