|
I've not heard of 696s suffering this problem, but a lot of the components are shared so it is possible as the tensioner rollers are the same as the Evo's.
Don't forget that the vertical cylinder runs hotter than the horizontal, which can lead to the belt running tighter than the horizontal. So you might want to check the tension; a lot of people advise having a lower tension on the vertical belt to take this into account. The usual guidance, if you're using the Allen key method to check the tension, is to use a 5mm for the front belt and 6mm for the rear.
Having said that, the Ducati workshop manual (for the Evo) shows the same tension on both cylinders.
|