UK Monster Owners Club Forum - View Single Post

slob · 12-08-2015, 06:01 PM

I used:
4x AN -6 to M14x1.5 adaptors (two on the engine, two on the cooler)
4x AN -6 STRAIGHT Swivel Seal Hose Fitting (might want angled for this mod.)
and 1m of AN -6 (8mm) 5/16" Braided Fuel Hose 1 m (you might want a bit more than 1m for this mod.)
from the excellent Torques UK

12-08-2015, 06:01 PM	#21
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,707	I used: 4x AN -6 to M14x1.5 adaptors (two on the engine, two on the cooler) 4x AN -6 STRAIGHT Swivel Seal Hose Fitting (might want angled for this mod.) and 1m of AN -6 (8mm) 5/16" Braided Fuel Hose 1 m (you might want a bit more than 1m for this mod.) from the excellent Torques UK Last edited by slob; 25-08-2015 at 08:52 PM.. Reason: thread corrected